Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 448)

Project Builder User Interface
Ascent Xtrata Pro User's Guide 429
Left
The Left coordinate of the region in mm or as a percentage. The value can be
changed manually in absolute units or by adding a percentage sign. For example
choosing 30% for Left means the left edge of the region always begins at 30% of
the document width as measured from the left.
Top
The Top coordinate of the region in mm or as a percentage. The value can be
changed manually in absolute units or by adding a percentage sign. For example
choosing 30% for Top means the top edge of the region always begins at 30% of
the document height as measured from the top.
Width
The Width of the region in mm or as a percentage. The value can be changed
manually in absolute units or by adding a percentage sign. For example choosing
30% for Width means the width of the region is always 30% of the document
width.
Height
The Height of the region in mm or as a percentage. The value can be changed
manually in absolute units or by adding a percentage sign. For example choosing
30% for Height means the height of the region is always 30% of the document
height.
Note
The changes are applied when you leave the edit mode by clicking
another field or pressing the Return key.
Buttons
Add
Click this button to insert a region in the list of regions. When the document is
displayed in the Document Viewer, the region is shown on the document.
Delete
Click this button to remove the currently selected region. You can select a region
from the list of regions or directly on the document in the Document Viewer.
Bar Code Locator Properties Dialog Box – Test Results Tab
Use the Test Results tab to evaluate your settings.