Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 66)

Project Builder
Ascent Xtrata Pro User's Guide 47
c
Select the desired properties for the locator by right-clicking the locator
and selecting Locator Properties.
For more details about locators, see Extraction.
Note
You can create fields and locators in any order, but you must create the
locator before you can assign it to a field.
5
Assign a locator to a field. First, select a field from the list of fields. Then,
expand the drop-down list of locators and select one.
Setting Up Document Separation
The following procedure describes the general steps for setting up document
separation. For details, see Project Builder User Interface – General Dialog Boxes.
X To set up document separation
1 Open the Project Settings dialog box. To do so, select Project | Project
Settings from the main menu or right-click Project from the Project panel and
select Project Settings from the context menu.
2
Select “Activate document separation” from the General tab and set other
settings as desired. This enables document separation for all classes in the
project.
3
To set additional document separation parameters for a class, open the Class
Properties dialog box for the class. To do so, select the desired class from the
Project panel. Then, select Project | Class Properties from the main menu or
right-click the class and select Class Properties from the context menu.
You can deactivate document separation for a class by selecting the “Ignore
for separation” option on the Class Properties dialog box.
Note
If desired, you can define special document separation processing with scripts.
Three script events are available for implementing class-specific document
separation in a script: Document_BeforeSepartePages, Document_AfterSepartePages,
and Document_SeparateCurrentPage.