Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 555)

Chapter 7
536 Ascent Xtrata Pro User’s Guide
Note that if an index field was already assigned to another extraction field, the
assignment is changed and the other extraction field is set to <none>. An index field
can be assigned to, at most, one extraction field.
For index fields that are created inside the Ascent Xtrata Pro synchronization dialog
(either manually or automatically), a predefined Ascent Capture field type called
“ExtractionFieldType” is used. If this Field type is not available, an error message is
displayed and synchronization is not possible.
The Field type for the index field can be changed afterwards manually in the Ascent
Capture Administration module.
If you assign an already existing index field using the Synchronization tool, its
already defined Field type is not changed.
Note
If you want to assign table fields, you need to create an Ascent Capture table
first.
Perform Synchronization
The Synchronization tool’s third screen synchronizes the project with the batch class
and stores the assignments in the Ascent Capture database.
To move from the second screen to the third screen, click Next Step.