Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 36)

Ascent Xtrata Pro User's Guide 17
Chapter 2
Project Builder
Introduction
Project Builder lets you set up, store, and test projects for Ascent Xtrata Pro that
contain all the necessary information for processing documents.
In Ascent Xtrata Pro there are three main aspects to setting up a project:
classification, extraction, and validation. You may define projects that contain only
classification, with no extraction or validation. However, projects that contain
validation must also contain classification and extraction.
Special invoice features are provided in Ascent Xtrata Pro Project Builder to
configure and train your invoice projects by setting parameters and analyzing
extraction examples from invoices. To aid in this training process, your settings can
be tested and the results immediately viewed.
Depending on the license, two different types of projects are supported:
• Ascent Xtrata Pro Projects
3 No field group locators are available.
3 The Project panel of the graphical user interface shows a complete
hierarchical class tree.
• Ascent Xtrata Pro Invoice Projects
3 The Project panel of the graphical user interface does not show the class
tree, since for invoice projects the class hierarchy is restricted to the base
class and one sub class.
3 No content classification is provided that means that you can neither train
Adaptive Feature Classifier nor set up Instruction classifier.
3 Field group locators are available.