Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 213)

Chapter 4
194 Ascent Xtrata Pro User's Guide
Figure 4-56. Defining Table Models
5
Add columns to your model using the Assign button
6
Remove columns from your model by using the Unassign button
7
Select a column on each side and click the Swap button to swap the columns.
This is important if you do not want to lose the settings you have made to
the column in the Table Locator.
8
Use the arrow buttons to rearrange your columns to the most logical order.
For each column used by the model, you can define a default value. You can also
decide whether the column should be visible on a validation form.
To sum up, there is a pool of available columns in the project that can be extended. A
subset of this pool forms a table model. You can have several table models in your
project.
Language Packages
You can define a language package to enhance the capabilities of a Table Locator . A
language package defines two things:
• What is in the table header and what is not.
One purpose of a language package for tables is to identify the header line(s)