Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 333)

Chapter 6
314 Ascent Xtrata Pro User's Guide
Figure 6-23. Field Properties Dialog Box
Fixed Value
To define a fixed result for a field, enable this option and specify the desired value.
If a fixed value is defined, and a locator has already been mapped to the field, then
the mapping is changed to <Default= ”Test Value>” This means that the field can not
be mapped to any locator, and therefore the Locator Result Threshold and the
confidence and distance values for validation can not be set, and are disabled.