Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 445)

Chapter 6
426 Ascent Xtrata Pro User's Guide
Figure 6-83. Bar Code Locator Properties – Bar Code tab
Type
Auto Detect is selected by default. If you want to use one of the other types, first
unselect Auto Detect.
Orientation
By default the orientation of the bar code is detected automatically. Select other
orientations as appropriate.
Length
Used to define the minimum and/or maximum length of the bar code that
means number of digits. First select Restrict length and then provide appropriate
minimum and maximum values. The maximum length that can be set depends
on the selected bar code type.
Bar Code Locator Properties Dialog Box – Regions Tab
Use the Regions tab to manage the pages and regions the locator will investigate.
By default, the entire document is enabled on all pages. To restrict the locator to
certain pages and areas, you can define regions that include or exclude areas.