Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 569)

Chapter 8
550 Ascent Xtrata Pro User's Guide
Interface Language
The language of the graphical user interface depends on the language set in Project
Builder. If Project Builder is not available, the default language (English) is used. To
change the language, open Project Builder, select Tools | Select Language, then
choose a language from the list in the Application Language dialog box.
Polling Interval
As an unattended module, Ascent Xtrata Pro Server requires no user intervention to
process batches. Once started, it automatically checks (or polls) for batches to process.
The polling interval is the amount of time (in seconds) between polling times.
X To set the polling interval
1 From the Ascent Xtrata Pro Server menu bar, select Options | Polling
Interval to display the Polling Interval dialog box.
Figure 8-3. Polling Interval
2 Set the desired polling interval. Valid values range from 1 to 86400 seconds.
Understanding the Log File
Event messages are displayed in the Event Log frame and are saved to event log files.
The event log automatically scrolls. Double-clicking an entry opens the full error
message in a message box.
Note
Ascent Capture errors that occur during server processing are only logged for
this log file and do not appear in the Ascent Capture error log.