B.1 parameter table – Yaskawa J1000 Compact Vector Control Drive User Manual
Page 188
No.
Name
Description
F6-52
DeviceNet PCA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-53
DeviceNet PPA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-54
DeviceNet Idle Mode Fault
Detection
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-55
DeviceNet Baud Rate Monitor
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1012 and later.
F6-56
DeviceNet Speed Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-57
DeviceNet Current Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-58
DeviceNet Torque Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-59
DeviceNet Power Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-60
DeviceNet Voltage Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-61
DeviceNet Time Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-62
DeviceNet Heartbeat Interval
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-63
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
MAC ID Memory
Note: Function available in versions
PRG: 1014 and later.
F6-64
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1014 and later.
F6-65
Dynamic Output Assembly 109
Parameter 3
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1014 and later.
B.1 Parameter Table
188
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide