Yaskawa J1000 Compact Vector Control Drive - Manual (Page 85)

u LO/RE LED and RUN LED Indications
LED Lit Flashing
Flashing Quickly
<1>
Off
When a Run command
is selected from the
LED operator
(LOCAL)
– –
Run command is selected
from device other than LED
operator (REMOTE)
During Run
• During deceleration to
stop
• When a Run
command is input and
frequency reference is
0
• During deceleration
at a fast-stop.
• During stop by
interlock operation.
<2>
During stop
As shown
<1> Refer to Figure 4.1 for the difference between “flashing” and “flashing quickly”.
<2> Refer to the description for parameter U4-21 on page 208 for information on verifying operation interlock.
Flashing
ON ON
ON
ON ON
ON
1 s
Flashing
quickly
Figure 4.1 RUN LED Status and Meaning
/
Drive output frequency
during stop
Frequency setting
OFF ON
Flashing
OFF OFF RUN LED
RUN
0 Hz
6 Hz
RUN
STOP STOP
Figure 4.2 RUN LED and Drive Operation
4.1 Using the Digital LED Operator
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 85
4
Start-Up Programming & Operation