Yaskawa J1000 Compact Vector Control Drive - Manual (Page 41)

u Installation Orientation and Spacing
Install the drive upright as illustrated in Figure 2.1 to maintain proper cooling.
A B B
A – Correct B – Incorrect
Figure 2.1 Correct Installation Orientation
n Single Drive Installation
Figure 2.2 shows the required installation spacing to maintain sufficient space for airflow and
wiring. Install the heatsink against a closed surface to avoid diverting cooling air around the
heatsink.
A A
B
C
C
Top/Bottom Clearance Side Clearance
A – 30 mm minimum
B – Airflow direction C – 100 mm minimum
Figure 2.2 Correct Installation Spacing
Note: IP20/NEMA Type 1, IP00/Open-Chassis, and IP20/Open-Chassis models require the same amount of
space above and below the drive for installation.
2.1 Mechanical Installation
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 41
2
Mechanical Installation