PLANET WGSW-52040 - Manual (Page 140)

no lldp transmit med tlv networkPolicy send LLDP-MED Network
Policy TLV. The no command
disables the capability.
lldp transmit med tlv extendPoe
no lldp transmit med tlv extendPoe
Configure the specified port to
send LLDP-MED Extended
Power-Via-MDI TLV. The no
command disables the
capability.
lldp transmit med tlv inventory
no lldp transmit med tlv inventory
Configure the port to send
LLDP-MED Inventory
Management TLVs. The no
command disables the
capability.
network policy {voice | voice-signaling | guest-voice
| guest-voice-signaling | softphone-voice |
video-conferencing | streaming-video |
video-signaling} [status {enable | disable}] [tag
{tagged | untagged}] [vid {<vlan-id> | dot1p}] [cos
<cos-value>] [dscp <dscp-value> ]
no network policy {voice | voice-signaling |
guest-voice | guest-voice-signaling |
softphone-voice | video-conferencing | streaming-
video | video-signaling}
Configure network policy of the
port, including VLAN ID, the
supported application (such as
voice and video), the
application priority and the
used policy, and so on.
civic location {dhcp server | switch | endpointDev}
<country-code>
no civic location
Configure device type and
country code of the location
with Civic Address LCI format
and enter Civic Address LCI
address mode. The no
command cancels all
configurations of the location
with Civic Address LCI format.
ecs location <tel-number>
no ecs location
Configure the location with
ECS ELIN format on the port,
the no command cancels the
configured location.
lldp med trap {enable | disable}
Enable or disable LLDP-MED
trap for the specified port.
Civic Address LCI address mode
17-62