PLANET WGSW-52040 - Manual (Page 439)

54-10
Client_1 and Client_2 means two different user’s PC installed IPv6 protocol, respectively connect with port
Ethernet1/12 of Switch1 and port Ethernet1/13 of Switch2, and enable the source address check function of
SAVI. Ethernet1/1 and Ethernet1/2 are uplink ports of Switch1 and Switch2 respectively, enable DHCP trust
and ND trust functions. Aggregation Switch3 enables DHCPv6 server function and route advertisement
function.
Configuration steps of SAVI DHCP-SLAAC scene:
Switch1>enable
Switch1#config
Switch1(config)#savi enable
Switch1(config)#savi ipv6 dhcp-slaac enable
Switch1(config)#savi check binding probe mode
Switch1(config)#interface ethernet1/1
Switch1(config-if-ethernet1/1)#ipv6 dhcp snooping trust
Switch1(config-if-ethernet1/1)#ipv6 nd snooping trust
Switch1(config-if-ethernet1/1)#exit