PLANET WGSW-52040 - Manual (Page 301)

15. Configure DHCP Snooping option 82 attributes
Command Explanation
Globe mode
ip dhcp snooping information
option subscriber-id format {hex |
acsii | vs-hp}
This command is used to set subscriber-id
format of DHCP snooping option82.
ip dhcp snooping information
option remote-id {standard |
<remote-id> }
no ip dhcp snooping information
option remote-id
Set the suboption2 (remote ID option) content of
option 82 added by DHCP request packets (they
are received by the port). The no command sets
the additive suboption2 (remote ID option)
format of option 82 as standard.
ip dhcp snooping information
option delimiter [colon | dot | slash
| space]
no ip dhcp snooping information
option delimiter
Set the delimiter of each parameter for
suboption of option82 in global mode, no
command restores the delimiter as slash.
ip dhcp snooping information
option self-defined remote-id
{hostname | mac | string WORD}
no ip dhcp snooping information
option self-defined remote-id
Set creation method for option82, users can
define the parameters of remote-id suboption by
themselves.
ip dhcp snooping information
option self-defined remote-id
format [ascii | hex]
Set self-defined format of remote-id for snooping
option82.
ip dhcp snooping information
option self-defined subscriber-id
{vlan | port | id (switch-id (mac |
hostname)| remote-mac) | string
WORD}
no ip dhcp snooping information
option type self-defined
subscriber-id
Set creation method for option82, users can
define the parameters of circute-id suboption by
themselves.
ip dhcp snooping information
option self-defined subscriber-id
format [ascii | hex]
Set self-defined format of circuit-id for snooping
option82.
Port mode
36-80