PLANET WGSW-52040 - Manual (Page 256)

next-server
[<address1>[<address2>[…<address8>
]]]
no next-server
[<address1>[<address2>[…<address8>
]]]
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
option <code> {ascii <string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated
to addresses in the address pool.
max-lease-time {[<days>] [<hours>]
[<minutes>] | infinite}
no max-lease-time
Set the maximum lease time for the
addresses in the address pool; the no
command restores the default setting.
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
Exclude the addresses in the address pool
that are not for dynamic allocation.
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|<type-number>}]
no hardware-address
Specify/delete the hardware address
when assigning address manually.
host <address> [<mask> |
<prefix-length> ]
no host
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
client-identifier <unique-identifier>
no client-identifier
Specify/delete the unique ID of the user
when binding address manually.
3. Enable logging for address conflicts
31-35