PLANET WGSW-52040 - Manual (Page 188)

3. Clear dynamic address table
Command Explanation
Admin Mode
clear mac-address-table dynamic [address
<mac-addr> ] [vlan <vlan-id>] [interface
[ethernet | portchannel] <interface-name>]
Clear the dynamic address table.
4. Configure MAC learning through CPU control
Command Explanation
Global Mode
mac-address-learning cpu-control
no mac-address-learning cpu-control
Enable MAC learning through CPU
control, the no command restores that
the chip automatically learn MAC
address.
show collision-mac-address-table Show the hash collision mac table.
Admin Mode
clear collision-mac-address-table Clear the hash collision mac table.
21.3 Typical Configuration Examples
Figure 22-3: MAC Table typical configuration example
21-110