PLANET WGSW-52040 - Manual (Page 22)

Supports SNMPv1 / v2c / v3
Supports Security IP safety net management function: avoid unlawful landing at
nonrestrictive area
Supports Syslog server for IPv4 and IPv6
Supports TACACS+
Layer3 Function
Static Route
Support maximum 128 static routes
Layer2 Function
Port Configuration
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control on each port
Port Loopback detect
Port Status
Display each port’s speed duplex mode, link status, flow control status, and
auto negotiation status.
VLAN
802.1Q Tagged Based VLAN, up to 256 VLAN groups
Q-in-Q
GVRP for VLAN Management
Private VLAN Edge (PVE) supported
Protocol-based VLAN
MAC-based VLAN
IP Subnet VLAN
Bandwidth Control
TX / RX / Both
Link Aggregation
IEEE 802.3ad LACP / static trunk
Supports 32 groups of 8-port trunk
QoS
8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification:
- IEEE 802.1p CoS / ToS
- IPv4 / IPv6 DSCP
- Port-based WRR
Multicast
IGMP v1/ v2 / v3 snooping
Querier mode support
MLDv1 / v2, MLD v1/v2 snooping
Querier mode support
Multicast VLAN Register (MVR)
Access Control List
Supports standard and expanded ACL
IP-based ACL / MAC-based ACL
Time-based ACL
1-6