PLANET WGSW-52040 - Manual (Page 483)

63-54
Global Mode
ntp server {<ip-address> |
<ipv6-address> } [version <version_no>]
[key <key-id>]
no ntp server {<ip-address> |
<ipv6-address> }
To enable the specified time server of time
source.
3. To configure the max number of broadcast or multicast servers supported by the NTP client
Command Explication
Global Mode
ntp broadcast server count <number>
no ntp broadcast server count
Set the max number of broadcast or
multicast servers supported by the NTP
client. The no operation will cancel the
configuration and restore the default value.
4. To configure time zone
Command Explication
Global Mode
clock timezone WORD {add | subtract}
<0-23> [<0-59>]
no clock timezone WORD
This command configures timezone in
global mode, the no command deletes the
configured timezone.
5. To configure NTP access control list
Command Explication
Global Mode
ntp access-group server <acl>
no ntp access-group server < acl>
To configure NTP server access control list.
6. To configure NTP authentication
Command Explication
Global Mode
ntp authenticate
no ntp authenticate
To enable NTP authentication function.