PLANET WGSW-52040 - Manual (Page 287)

2. DHCPv6 relay option basic functions configuration
Command Description
Global mode
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
This command enables the
switch relay to support option
37 and the no form of this
original default configuration,
i.e. vlan name together with
port name.
Port mode
ipv6 dhcp snooping remote-id <remote-id>
no ipv6 dhcp snooping remote-id
This command is used to set
the form of adding option 37 in
received DHCPv6 request
packets, of which <remote-id>
is the content of remote-id in
user-defined option 37 and it is
a string with a length of less
than 128. The no operation
restores remote-id in option 37
to enterprise-number together
with vlan MAC address.
ipv6 dhcp snooping subscriber-id <subscriber-id>
no ipv6 dhcp snooping subscriber-id
This command is used to set
the form of adding option 38 in
received DHCPv6 request
packets, of which
<subscriber-id> is the content
of subscriber-id in user-defined
option 38 and it is a string with
a length of less than 128. The
no operation restores
subscriber-id in option 38 to
vlan name together with port
name such as
"Vlan2+Ethernet1/2".
35-66