PLANET WGSW-52040 - Manual (Page 398)

2. Configure the RADIUS authentication key
Command Explanation
Global Mode
radius-server key {0 | 7} <string>
no radius-server key
To configure the encryption key for the
RADIUS server. The no form of this
command will remove the configured key.
3. Configure the RADIUS server
Command Explanation
Global Mode
radius-server authentication host
{<ipv4-address> | <ipv6-address>} [port
<port-number>] [key {0 | 7} <string>]
[primary] [access-mode {dot1x | telnet}]
no radius-server authentication host
{<ipv4-address> | <ipv6-address>
Specifies the IPv4/IPv6 address and the
port number, whether be primary server for
RADIUS accounting server; the no
command deletes the RADIUS accounting
server.
radius-server accounting host
{<ipv4-address> | <ipv6-address>} [port
<port-number>] [key {0 | 7} <string>]
[primary]
no radius-server accounting host
{<ipv4-address> | <ipv6-address>}
Specifies the IPv4/IPv6 address and the
port number, whether be primary server for
RADIUS accounting server; the no
command deletes the RADIUS accounting
server.
4. Configure the parameter of the RADIUS service
Command Explanation
Global Mode
radius-server dead-time <minutes>
no radius-server dead-time
To configure the interval that the RADIUS
becomes available after it is down. The no
form of this command will restore the
default configuration.
radius-server retransmit <retries>
no radius-server retransmit
To configure retry times for the RADIUS
packets. The no form of this command
restores the default configuration.
47-177