PLANET WGSW-52040 - Manual (Page 431)

53-2
Global mode
vacl mac access-group {<700-1199> |
WORD} {in | out} [traffic-statistic] vlan
WORD
no vacl mac access-group {<700-1199> |
WORD} {in | out} vlan WORD
Configure or delete MAC VLAN-ACL.
(Egress filtering is not supported by
switch.)
3. Configure VLAN-ACL of MAC-IP
Command Explanation
Global mode
vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} [traffic-statistic] vlan
WORD
no vacl mac-ip access-group
{<3100-3299> | WORD} {in | out} vlan
WORD
Configure or delete MAC-IP VLAN-ACL.
(Egress filtering is not supported by
switch.)
4. Configure VLAN-ACL of IPv6 type
Command Explanation
Global mode
vacl ipv6 access-group (<500-699> |
WORD) {in | out} (traffic-statistic|) vlan
WORD
no ipv6 access-group {<500-699> | WORD}
{in | out} vlan WORD
Configure or delete IPv6 VLAN-ACL.
(Egress filtering is not supported by
switch).This switch only supports the
ipv6 standard acl.
5. Show configuration and statistic information of VLAN-ACL
Command Explanation
Admin mode
show vacl [in | out] vlan [<vlan-id>]
Show the configuration and the statistic
information of VACL. (Egress filtering is
not supported by switch.)
6. Clear statistic information of VLAN-ACL
Command Explanation