PLANET WGSW-52040 - Manual (Page 266)

lifetime {<valid-time> | infinity}
{<preferred-time> | infinity}
no lifetime
To configure valid time or preferred time of
DHCPv6 address pool.
3. To enable DHCPv6 server function on port.
Command Explanation
Interface Configuration Mode
ipv6 dhcp server <poolname>
[preference <value>] [rapid-commit]
[allow-hint]
no ipv6 dhcp server <poolname>
To enable DHCPv6 server function on
specified port, and binding the used
DHCPv6 address pool.
32.3 DHCPv6 Relay Delegation Configuration
DHCPv6 relay delegation configuration task list as below:
1． To enable/disable DHCPv6 service
2． To configure DHCPv6 relay delegation on port
1. To enable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enableDHCPv6 service.
2. To configure DHCPv6 relay delegation on port
Command Explanation
Interface Configuration Mode
ipv6 dhcp relay destination
{[<ipv6-address>] [interface
{ <interface-name> | vlan <1-4096>}]}
no ipv6 dhcp relay destination
{[<ipv6-address>] [interface
{ <interface-name> | vlan <1-4096>}]}
To specify the destination address of
DHCPv6 relay transmit; The no form of
this command delete the configuration.
32-45