4 ntp function troubleshooting, Unction, Roubleshooting – PLANET WGSW-52040 User Manual
Page 486
Advertising
63-57
63.4 NTP Function Troubleshooting
In configuration procedures, if there is error occurred, the system can give out the debug information.
The NTP function disables by default, the show command can be used to display current configuration. If the
configuration is right please use debug every relative debugging command and display specific information in
procedure, and the function is configured right or not, you can also use show command to display the NTP
running information, any questions please send the recorded message to the technical service center.
Advertising