4 web portal authentication troubleshooting, Ortal, Uthentication – PLANET WGSW-52040 User Manual

Page 429: Roubleshooting

Advertising
background image

52-208

Switch(config)#interface vlan 1

Switch(config-if-vlan1)#ip address 192.168.40.50 255.255.255.0

Switch(config)#webportal enable

Switch(config)#webportal nas-ip 192.168.40.50

Switch(config)#webportal redirect 192.168.40.99

Switch(config)#interface ethernet 1/3

Switch(config-if-ethernet1/3)#webportal enable

Web portal authentication associates with DHCP snooping binding to use, the configuration is

as follows:

Switch(config)#ip dhcp snooping enable

Switch(config)#ip dhcp snooping binding enable

Switch(config)#interface ethernet 1/2

Switch(config-if-ethernet1/2)#webportal enable

Switch(config-if-ethernet1/2)#ip dhcp snooping binding webportal

52.4 Web Portal Authentication Troubleshooting

When using web portal authentication, the system will show the detailed prompt information if

the operation is wrong.

Web portal authentication is disabled by default. After ensure the configuration is correct, use

debug command and show command to check the relative information, if you can not

determine the cause of the problem, please send the recorded message to technical server

center of our company.

Advertising