PLANET WGSW-52040 - Manual (Page 423)

Step2: Configure port ethernet1/1 which connect server as trust port, and configure vendor tag
strip function.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
Switch(config-if-ethernet1/1)#pppoe intermediate-agent vendor-tag strip
Step3: Port ethernet1/2 of vlan1 and port ethernet1/3 of vlan 1234 enable PPPoE IA function of
port.
Switch(config-if-ethernet1/2)#pppoe intermediate-agent
Switch(config-if-ethernet1/3)#pppoe intermediate-agent
Step4: Configure pppoe intermediate-agent access-node-id as abcd.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id access-node-id abcd
Step5: Configure pppoe intermediate-agent identifier-string as “efgh”, combo mode as spv,
delimiter of Slot ID and Port ID as “#”, delimiter of Port ID and Vlan ID as “/”.
Switch(config)#pppoe intermediate-agent type tr-101 circuit-id identifier-string efgh option
spv delimiter # delimiter /
Step6: Configure circuit-id value as bbbb on port ethernet1/2.
Switch(config-if-ethernet1/2)#pppoe intermediate-agent circuit-id bbbb
Step7: Configure remote-id as xyz on ethernet1/3.
Switch(config-if-ethernet1/3)#pppoe intermediate-agent remote-id xyz
circuit-id value is ”bbbb”, remote-id value is ”0a0b0c0d0e0f” for the added vendor tag of
port ethernet1/2.
circuit-id value is ”efgh eth 01#003/1234”, remote-id value is ”xyz” for the added vendor
tag of port ethernet1/3.
51-202