PLANET WGSW-52040 - Manual (Page 418)

TLV type field (2 bytes): A TLV frame means a TAG, type field means TAG type, the table is as
follows.
TLV length field (2 bytes): Specify the length of TAG data field.
TLV data field (the length is not specified): Specify the transmitted data of TAG.
Tag Type Tag Explanation
0x0000 The end of a series tag in PPPoE data field, it is saved for ensuring the version
compatibility and is applied by some packets.
0x0101 Service name. Indicate the supplied services by network.
0x0102 Server name. When user receives the PADO response packet of AC, it can
obtain the server name from the tag and select the corresponding server.
0x0103 Exclusive tag of the host. It is similar to tag field of PPPoE data packets and is
used to match the sending and reveiving end (Because broadcast network may
exist many PPPoE data packets synchronously).
0x0104 AC-Cookies. It is used to avoid the vicious DOS attack.
0x0105 The identifier of vendor.
0x0110 Relay session ID. PPPoE data packet can be interrupted to other AC, this field is
used to keep other connection.
0x0201 The error of service name. When the requested service name is not accepted by
other end, the response packet will take this tag.
0x0202 The error of server name.
0x0203 Common error.
Table 51-1: TAG value type of PPPoE
51.1.2.3 PPPoE Intermediate Agent vendor tag Frame
The following is the format of tag added by PPPoE IA, adding tag is the Uppermost function of
PPPoE IA.
51-197