PLANET WGSW-52040 - Manual (Page 290)

option 37 or option 38 options
exist and the option 37 and
option 38 of relay-forw in the
innermost layer are selected.
The no operation of it restores
the default configuration, i.e.
selecting option 37 and option
38 of the original packets.
IPv6 DHCP Class configuration mode
{remote-id [*] <remote-id> [*] | subscriber-id [*]
<subscriber-id> [*]}
no {remote-id [*] <remote-id> [*] | subscriber-id [*]
<subscriber-id> [*]}
This command configures
option 37 and option 38 that
match the class in ipv6 dhcp
class configuration mode.
DHCPv6 address pool configuration mode
class <class-name>
no class <class-name>
This command associates
class to address pool in
DHCPv6 address pool
configuration mode and enters
class configuration mode in
address pool. Use no
command to remove the link.
address range <start-ip> <end-ip>
no address range <start-ip> <end-ip>
This command is used to set
address range for a DHCPv6
class in DHCPv6 address pool
configuration mode, the no
command is used to remove
the addreass range. The
prefix/plen form is not
supported.
35-69