PLANET WGSW-52040 - Manual (Page 141)

{description-language | province-state | city | county
| street | locationNum | location | floor | room |
postal | otherInfo} <address>
no {description-language | province-state | city |
county | street | locationNum | location | floor | room
| postal | otherInfo}
Configure the detailed address
after enter Civic Address LCI
address mode of the port.
Global mode
lldp med fast count <value>
no lldp med fast count
When the fast LLDP-MED
startup mechanism is enabled,
it needs to fast send the LLDP
packets with LLDP-MED TLV,
this command is used to set
the value of the fast sending
packets, the no command
restores the default value.
Admin mode
show lldp
Show the configuration of the
global LLDP and LLDP-MED.
show lldp [interface ethernet <IFNAME>]
Show the configuration of
LLDP and LLDP-MED on the
current port.
show lldp neighbors [interface ethernet <IFNAME>]
Show LLDP and LLDP-MED
configuration of the neighbors.
17-63