4 am function troubleshooting, Unction, Roubleshooting – PLANET WGSW-52040 User Manual
Page 388
Advertising
44.4 AM Function Troubleshooting
AM function is disabled by default, and after it is enabled, relative configuration of AM can be
made.
Users can view the current AM configuration with “show am” command, such as whether the
AM is enabled or not, and AM information on each interface, they can also use “show am
[interface <interface-name>]” command to check the AM configuration information on a
specific interface.
If any operational error happens, the system will display detailed corresponding prompt.
44-167
Advertising