PLANET WGSW-52040 - Manual (Page 216)

messages can be only red or green
when passing policy. When printing the
information, in-profile means green and
out-profile means red; In dual bucket
mode, there are three colors(green,
yellow, red) of messages. in-profile
means green, out-profile means red and
yellow.
Policy class map configuration mode
drop
no drop
transmit
no transmit
Drop or transmit the traffic that match
the class, the no command cancels the
assigned action.
3. Apply QoS to port or VLAN interface
Command Explanation
Interface Configuration Mode
mls qos trust dscp
no mls qos trust dscp
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {<default-cos>}
no mls qos cos
Configure the default CoS value of the
port; the no command restores the
default setting.
service-policy input <policy-map-name>
no service-policy input {<policy-map-name>}
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port or deletes
all the policy maps applied on the
ingress direction of the port . Egress
policy map is not supported yet.
Global Mode
service-policy input <policy-map-name> vlan
<vlan-list>
no service-policy input {<policy-map-name>}
vlan < vlan-list>
Apply a policy map to the specified
VLAN interface; the no command
deletes the specified policy map applied
to the VLAN interface or deletes all the
policy maps applied in the ingress
23-138