PLANET WGSW-52040 - Manual (Page 384)

43.4 The Number Limitation Function of MAC and IP in
Port, VLAN Troubleshooting Help
The number limitation function of MAC and IP in Port, VLAN is disabled by default, if users
need to limit the number of user accessing the network, they can enable it. If the number
limitation function of MAC address can not be configured, please check whether Spanning-tree,
dot1x, TRUNK is running on the switch and whether the port is configured as a MAC-binding
port. The number limitation function of MAC address is mutually exclusive to these
configurations, so if the users need to enable the number limitation function of MAC address
on the port, they should check these functions mentioned above on this port are disabled.
If all the configurations are normal, after enabling the number limitation function of MAC and IP
in Port, VLAN, users can use debug commands to debug every limitation, check the details of
number limitations and judge whether the number limitation function is correct. If there is any
problem, please sent result to technical service center.
43-163