PLANET WGSW-52040 - Manual (Page 241)

4. Configure trusted IP
Command Explanation
Global configuration mode
anti-arpscan trust ip <ip-address>
[<netmask>]
no anti-arpscan trust ip <ip-address>
[<netmask>]
Set the trust attributes of IP.
5. Configure automatic recovery time
Command Explanation
Global configuration mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
Enable or disable the automatic
recovery function.
anti-arpscan recovery time <seconds>
no anti-arpscan recovery time
Set automatic recovery time.
6. Display relative information of debug information and ARP scanning
Command Explanation
Global configuration mode
anti-arpscan log enable
no anti-arpscan log enable
Enable or disable the log function of ARP
scanning prevention.
anti-arpscan trap enable
no anti-arpscan trap enable
Enable or disable the SNMP Trap function
of ARP scanning prevention.
show anti-arpscan [trust <ip | port |
supertrust-port> | prohibited <ip | port>]
Display the state of operation and
configuration of ARP scanning prevention.
Admin Mode
debug anti-arpscan <port | ip>
no debug anti-arpscan <port | ip>
Enable or disable the debug switch of ARP
scanning prevention.
27-20