6 mac notification configuration, 1 introduction to mac notification, 2 mac notification configuration – PLANET WGSW-52040 User Manual

Page 192: Otification, Onfiguration, 1 introduction to mac notification -114, 2 mac notification configuration -114

Advertising
background image

If MAC address binding cannot be enabled for a port, make sure the port is not

enabling port aggregation and is not configured as a Trunk port. MAC address

binding is exclusive to such configurations. If MAC address binding is to be enabled,

the functions mentioned above must be disabled first.

If a secure address is set as static address and deleted, that secure address will be

unusable even though it exists. For this reason, it is recommended to avoid static

address for ports enabling MAC address.

21.6 MAC Notification Configuration

21.6.1 Introduction to MAC Notification

MAC Notification function depends on the notification. Add or remove the MAC address,

namely, when the device is added or removed, it will notify administrator about the changing by

the trap function of snmp.

21.6.2 MAC Notification Configuration

Mac notification configuration task list:

1. Configure the global snmp MAC notification

2. Configure the global MAC notification

3. Configure the interval for sending MAC notification

4. Configure the size of history table

5. Configure the trap type of MAC notification supported by the port

6. Show the configuration and the data of MAC notification

7. Clear the statistics of MAC notification trap

1. Configure the global snmp MAC notification

Command Explanation

Global mode

snmp-server enable traps mac-notification

no snmp-server enable traps mac-notification

Configure or cancel the global snmp

MAC notification.



21-114

Advertising