ProSoft Technology MVI56-AFC - Manual (Page 109)

MVI56-AFC ♦ ControlLogix Platform Archives
Liquid and Gas Flow Computer User Manual
ProSoft Technology, Inc. Page 109 of 316
February 25, 2011
bit 2 Diff. pressure input out of range -
bit 3 Flowing density input out of range -
bit 4 Water content input out of range -
bit 5 Diff. pressure low -
bit 8 Orifice characterization error -
bit 9 Analysis total zero -
bit 10 Analysis total not normalized -
bit 11 AGA8 calculation error -
bit 12 API calculation error, density correctio -
bit 13 API calculation error, Ctl -
bit 14 API calculation error, vapor pressure -
bit 15 API calculation error, Cpl -
Status Bits
bit 11 Meter was enabled -
bit 12 Backplane communication fault -
bit 13 Measurement configuration changed -
bit 14 Power up -
bit 15 Cold start -
AFC-56(16) Daily Archive Date: 16-09-2002 16:26:41
Site Name: MVI Flow Station
Project: AFC
___________________________________________________________________________
Meter 1:
Tag M01
Archive 1
Closing timestamp of archive 2002-04-27.00:00:02
Opening timestamp of archive 2002-04-26.23:59:42
Status bitmap (details below) 00h
Alarms bitmap (details below) 0000h
Flowing period 20
Event counter 53
Net accumulator (x f3) 234
Net accumulator residue (x f3) 0,1092186
Net flow rate (x f3/h) 40248,01
Temperature (°F) 15
Pressure (psig) 1000
Differential pressure (hw) 22
Relative density (60°F/60°F) 0,7404
Reference compressibility 0,9989
Flowing compressibility 0,9051
Fpv 1,0505
Velocity of approach factor Ev 1,0328
Expansion factor Y 0,9997
Discharge coefficient 0,6043
Alarm Bits
bit 0 Temperature input out of range -
bit 1 Pressure input out of range -
bit 2 Diff. pressure input out of range -
bit 3 Flowing density input out of range -