ProSoft Technology MVI56-AFC - Manual (Page 250)

MVI56-AFC Sample Logic MVI56-AFC ♦ ControlLogix Platform
User Manual Liquid and Gas Flow Computer
Page 250 of 316 ProSoft Technology, Inc.
February 25, 2011
Using the AFC Manager you should re-map the registers above to the Virtual
Slave. In this example we will re-map the addresses as follows:
Virtual Modbus Slave Input Register Address Primary Modbus Slave Input Register
Address
0 10
1 11
2 2510
3 2511
4 5010
5 5011
6 7510
7 7511
Note: The past archives and events are always input registers. All other data should be re-mapped
as holding registers.
In the sample ladder we can now configure the Modbus Gateway block to read 6
input registers words from the Virtual slave starting at address 0: