ProSoft Technology MVI56-AFC - Manual (Page 237)

MVI56-AFC ♦ ControlLogix Platform MVI56-AFC Sample Logic
Liquid and Gas Flow Computer User Manual
ProSoft Technology, Inc. Page 237 of 316
February 25, 2011
12.3.11 Checking Meter Alarms
The logic continuously informs if a meter has an alarm or not. Refer to the
following controller tags for the meter alarm status:
Information Controller Tag Values
Meter 1 Alarm
Status
AFC56.Site_Alarms.Meter1 0 = Meter 1 does not have alarm
1 = Meter 1 has alarm
Meter 2 Alarm
Status
AFC56.Site_Alarms.Meter2 0 = Meter 2 does not have alarm
1 = Meter 2 has alarm
Meter 3 Alarm
Status
AFC56.Site_Alarms.Meter3 0 = Meter 3 does not have alarm
1 = Meter 3 has alarm
Meter 4 Alarm
Status
AFC56.Site_Alarms.Meter4 0 = Meter 4 does not have alarm
1 = Meter 4 has alarm
… … …
Meter 16 Alarm
Status
AFC56.Site_Alarms.Meter16 0 = Meter 16 does not have alarm
1 = Meter 16 has alarm
In the following example, Meters 1 and 2 have alarms. The other meters do not:
For each meter, the logic also indicates which alarm was generated. Refer to the
following controller tags for meter alarm information:
Information Controller Tag Values
Meter 1 Alarm AFC56.Meters[0].Results.Alarms Please see following table
Meter 2 Alarm AFC56.Meters[1].Results.Alarms Please see following table
Meter 3 Alarm AFC56.Meters[2].Results.Alarms Please see following table
Meter 4 Alarm AFC56.Meters[3].Results.Alarms Please see following table
… … …
Meter 16 Alarm AFC56.Meters[15].Results.Alarms Please see following table