ProSoft Technology MVI56-AFC - Manual (Page 148)

Events MVI56-AFC ♦ ControlLogix Platform
User Manual Liquid and Gas Flow Computer
Page 148 of 316 ProSoft Technology, Inc.
February 25, 2011
9.12 Prover Data Point Events
Note: Currently, this function is only available on the MVI56- AFC. For all other platforms continue
to use AFC Manager 2.05 or earlier.
Group Sbgp Item DTyp Rkv Data point
0 0 Process input calibration ** not implemented
0 Flot - (Inlet) temperature
1 Flot - Outlet temperature
2 Flot - Switch bar temperature
3 Flot - (Inlet) pressure
4 Flot - Outlet pressure
0 1 Process input alarm ** not implemented
0 Flot - (Inlet) temperature range
1 Flot - Outlet temperature range
2 Flot - Switch bar temperature range
3 Flot - (Inlet) pressure range
4 Flot - Outlet pressure range
1 0 Prover classification
0 Diby - Prover type, master meter number
1 Diby - Measurement system, density selection
2 0 0 Bsht - Prover options
3 0 Prover run counts
0 Usht - Runs per prove, total
1 Usht - Runs per prove, selected
2 Usht - Max total runs before abort
3 Usht - Passes per run (short prover)
4 Usht - Min pulses per run * 1000
5 Usht - Max seconds per run
4 Prover input format codes
0 0 Usht - Pulse count for run/pass
1 0 Usht - Master meter pulse count
5 Prover reference conditions
0 0 Flot * Temperature
1 0 Flot * Pressure
6 Prover parameter value
0 0 Flot - Meter factor precision
1 0 Flot - Pulse interpolation ratio
2 0 Flot - Flow tube linear thermal expansion coefficient
3 0 Flot - Switch bar linear thermal expansion coefficient
4 0 Flot - Calibrated prover volume