ProSoft Technology MVI56-AFC - Manual (Page 78)

Modbus Communication MVI56-AFC ♦ ControlLogix Platform
User Manual Liquid and Gas Flow Computer
Page 78 of 316 ProSoft Technology, Inc.
February 25, 2011
6.1 Communication Parameters
The module supports the following communication parameters for each
communication port:
Parameter Values
Baud Rate 300, 600, 1200, 2400, 4800, 9600 or 19200
Data Bits 7 or 8
Stop Bits 1 or 2 Bits
Mode RTU or ASCII
Parity None, Even or Odd
Note: Do not configure a port for both RTU mode and 7 data bits as this combination is not
supported by the Modbus protocol.
You must configure the communication parameters for each communication port
using the AFC Manager software (Site Configuration):