Meridian America Link/Customer Controlled Routing - Manual (Page 119)

Chapter 6: Site survey/installation checklist 101
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
IPE Module and Application Module: Meridian Link/CCR
software
Use the following checklists to check the software and documentation.
IPE Module and Application Module: Meridian Link/CCR
software current status
Use the showid and version commands to obtain the following information:
¥ Meridian Link serial number: _________________________________
¥ Current IPE Module and Application Module software release:
_________________________________________________________
¥ Current IPE Module and Application Module software options:
_________________________________________________________
Changes to IPE Module and Application Module
Compare the ordering documents to the shipping documents to ensure
complete shipment of software. Some software options require specific
hardware; refer to Chapter 4, ÒMeridian Link/CCR hardwareÓ to make
certain that the proper hardware was ordered and delivered with the
software.
IPE Module and Application Module software conversion/upgrade
required: Yes ( ) No ( )
If required, from Release: __________ to Release: __________
Will Ethernet be enabled? Yes ( ) No ( )