Meridian America Link/Customer Controlled Routing - Manual (Page 420)

402 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 3: Load application software from tape (continued)
Figure 121
Meridian 1 ID prompt
Please enter the Meridian 1 ID of this site:
(or Q or q to quit)
4 You are prompted to enter your Meridian 1 ID (Figure 121). Type
your ID and press [Return].
Note: If you make a mistake while typing your Meridian ID or
keycode, do not try to backspace and correct the error. Instead,
continue until step 13, where you will be able to type n, press [Return],
and return to step 4.
Note: Input for the Meridian ID is case sensitive; input for the keycode
is not case sensitive.
Figure 122
Keycode prompt 1
Please enter your key code (5 groups of 4 characters):
Keycode group 1 (or Q or q to quit):
5 You are prompted to enter your keycode (Figure 122). Type the first
fours-character group of your keycode and press [Return].
Figure 123
Keycode prompt 2
Keycode group 2 (or Q or q to quit):
6 You are prompted for the second group of keycode characters
(Figure 123). Type the second group and press [Return].