Meridian America Link/Customer Controlled Routing - Manual (Page 451)

Chapter 14: Software installation, upgrade, and update procedures 433
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 6: Load the operating system tape on an IPE Module or an
Application Module with an MVME167 card (continued)
Note: If the Ò167-Diag>У, Т4120-Diag>Ó or Ò4120-Bug>Ó prompt
appears, type menu and press [Return].
Figure 177
Start-up interrupt menu
1) Continue System Startup
2) Select Alternate Boot Device
3) Go to System Debugger
4) Initiate Service Call
5) Display System Test Errors
6) Dump Memory to Tape
Enter Menu #:
7 Insert the base operating system tape (tape 1 of 2, System V/68
BOS R3V7.1) into the tape drive.
The tape indicator light comes on, flashes, and then goes off. Wait
for the tape indicator light to turn off before proceeding to the next
step.