Meridian America Link/Customer Controlled Routing - Manual (Page 558)

540 Chapter 19: Single Terminal Access
553-3202-210 Standard October 1998
Table 148
LD 17ÑConfigure MSDL port
Prompt Response Comment
REQ CHG Create or change information in the
database
TYPE CFN Configuration record data block
ADAN NEW STA x Add STA with a logical ID x (0-15)
TTY 0-15 Device number (MSDL SDI TTY)
Note: Use the same TTY number
you assigned to the ADAN prompt in
step 8.
CTYP MSDL Card type is MSDL (automatic
response)
GRP 0 Network Group Number (this prompt
only appears for Option 81 systems)
DNUM 0Ð15 Device number; same as TTY
(automatic response)
ADMIN_
PORT 0 Admin port number (automatic
response)
LANG (ENG) Language supported (automatic
response for Release 19)
ADDITIONAL
PORTS* P1, P2, P3 The MSDL port(s) cabled to the SYS
CONS port
* If one of the ADDITIONAL PORTS must be deleted, type an ÒXÓ before
the port number (for example, XP2).
12 Verify the above configuration in LD 22.
13 Access LD 48 and type ENL STA x to enable the STA port.
14 Type STAT STA x to verify the status of the STA application.
Figure 301 shows STA 0 on port 0 (admin port) is enabled.