Meridian America Link/Customer Controlled Routing - Manual (Page 480)

462 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 8: Load the application software from tape (continued)
Figure 231
Meridian 1 ID prompt
Please enter the Meridian 1 ID of this site:
(or Q or q to quit)
10 The system prompts you for the Meridian 1 ID. Type your ID and
press [Return].
Note: If you make a mistake while typing your Meridian 1 ID or
keycode, do not try to backspace and correct the error. Instead,
continue until step 19, where you will be able to type n, press [Return],
and return to step 10.
Note: Input for the Meridian 1 ID is case sensitive; input for the
keycode is not case sensitive.
Figure 232
Keycode prompt 1
Please enter your keycode (5 groups of 4 characters):
Keycode group 1 (or Q or q to quit):
11 The system prompts you for your keycode. Type the first four-
character group of your keycode and press [Return].
Figure 233
Keycode prompt 2
Keycode group 2 (or Q or q to quit):