Meridian America Link/Customer Controlled Routing - Manual (Page 465)

Chapter 14: Software installation, upgrade, and update procedures 447
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 6: Load the operating system tape on an IPE Module or an
Application Module with an MVME167 card (continued)
Figure 201
BOS installation, completion
***> Unmounting all mounted file systems
***> Synchronizing the installation disk
BOS product installation is completed.
You must RESET the system and allow it to autoboot from the hard disk
**************************
**** RESET THE SYSTEM ****
**************************
31 Remove the operating system tape from the drive.
32 Proceed with Procedure 7 and go through the setup.