Meridian America Link/Customer Controlled Routing User Manual
Page 235
Chapter 9: Meridian Link/CCR interface cabling 217
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Table 76
Power harness cables (Application Module)
Part number
Application
NT7D52AA (A0372656)
Power monitor cable: carries signals from the power
sense card to the power monitor
NT7D55AA (AC) (A0372722)
NT7D55AB (DC) (A0372723)
MPDU power harness (located inside the MPDU):
connects the circuit breakers to the output connectors
NT7D55AD (AC/DC)
(A0372725)
MPDU to power supply harness: connects the MPDU to
the Application Module
NT7D55AE (A0372726)
Power supply to VME bus backplane power harness:
carries power from the output connectors to the VME bus
backplane
NT7D55AF (A0372727)
VME bus backplane to disk/tape power harness: carries
power from the VME bus backplane to the disk/tape
connector
NT7D55AG (A0372728)
VME bus backplane to auxiliary/sense power harness:
carries power from the VME bus backplane to the power
sense card (and the MVME712AM transition card, if
installed)
NT7D55AJ (A0372904)
Disk/tape internal power harness: connects power from
the floating connectors to the disk/tape drives
NT7D55AK (AC) (A0372905)
NT7D55AL (DC) (A0372906)
Power supply input harness: carries the input power from
floating connectors on the power supply to the power
supply input terminals
NT7D55BM (AC/DC)
(A0372907)
Power supply output harness: carries the output from the
terminal block (inside the power supply) to the floating
connectors
NT7D55BG (A0375140)
VME logic return harness: connects logic return on the
VME bus to the system logic return for signaling
compatibility
NT8D40AM (AC) (A0350327)
NT7D11AE (DC) (A0364644)
Module-to-module power harness