Meridian America Link/Customer Controlled Routing - Manual (Page 446)

428 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 5: Load the operating system tape on an Application Module
with an MVME147 card (continued)
Figure 171
BOS installation, completion
Re-enter new password:
***> Unmounting all mounted file systems
***> Synchronizing the installation disk
BOS product installation is completed.
You must RESET the system and allow it to autoboot from the hard disk
.
**************************
**** RESET THE SYSTEM ****
**************************
34 Remove the BOS tape from the drive.
Note: Procedure 6 is for the IPE Module or MVME167 card.
35 Proceed with Procedure 7 and go through the setup.