Meridian America Link/Customer Controlled Routing - Manual (Page 240)

222 Chapter 9: Meridian Link/CCR interface cabling
553-3202-210 Standard October 1998
Table 79
Cables from transition cards to the universal I/O panel (Application Module)
Part number Length Cable description and application
NT7D46AA
(A0372653)
(MVME712A/AM) 35 cm
(14 in.) 9-pin (DB9) round subminiature D-style cable: connects port
SP1 on the MVME712A or AM transition card to the SDI link
port
NT7D48AA
(A0372655)
(replaced by
NT7D95AA on
newer systems) 35 cm
(14 in.)
22 cm
(9 in.)
25-pin (DB25) round subminiature D-style cable: connects
ports SP1 (ESDI port) and SP3 (host port) on
the MVME705B transition card to the ESDI link and Host
ports
NT7D60AA*
(A0373962)
(MVME712AM) 35 cm
(14 in.) 4-pin RJ11 to 9-pin subminiature D-style cable: connects the
built-in modem (teledapt connector) on the MVME712AM
transition card to the Int Modem port
NT7D61DA 35 cm
(14 in.) 9-pin to 25-pin subminiature D-style cable: connects port
SP4 on the MVME712A/AM card to the Spare port
NT7D79AA
(A0387839)
(MVME712A/AM) 35 cm
(14 in.) 9-pin round subminiature D-style cable: connects port SP1
on the MVME712A or AM transition card to the SYS CONS
port
NT7D95AA** 22 cm
(9 in.) 25-pin flat subminiature D-style cable: connects SP1, SP2,
and SP3 of the NT6D51AA transition card to serial I/O ports
1Р3, 4Р6, and 7Ð8
* When the MVME712A card is used, the NT7D60AA cable is replaced by an NT7D46AA
cable, which connects port SP2 on the transition card to the AML.
** Used only when NT6D51AA card is present (CCR Application Module).