Meridian America Link/Customer Controlled Routing - Manual (Page 172)

154 Chapter 9: Meridian Link/CCR interface cabling
553-3202-210 Standard October 1998
External I/O cables
Table 42 lists external I/O cables that connect ports on the IPE Module
cable to an SDI port, the ESDI/MSDL port, and consoles.
Table 42
Cables from the IPE Module ports to external equipment
Part number Length Cable description and application
NT1R03HF (A0402669) 3 m (10 ft.) Modem cable: connects port 2 of the
NT1R03BA cable to the external modem
NT8D93AJ (A0357270)
(Options 21Ð81 only)
NT8D93AW (A0357271)
(Options 21Ð81 only)
5 m (16 ft.)
15 m (48 ft.)
25-pin SDI cable: connects port 3 of the
NT1R03AA cable to the SDI Paddle Board
NTAK19AA (A0372718)
(Option 11 only, except
Option 11E) 1.8 m (6 ft.) 2-port SDI cable: connects port 3 of the
NT1R03AA cable to the NTAK03AA TDS/DTR
card
NTAK19BA (A0372719)
(Option 11 only) 1.8 m (6 ft.) 4-port SDI cable: connects port 3 of the
NT1R03AA cable to the NTAK02AA SDI/DCH
card
NT1R03DB (A0402335)
NT1R03DC (A0402336)
NT1R03DF (A0402337)
NT1R03DP (A0402338)
NT1R03DV (A0402339)
NT1R03EB (A0402330)
NT1R03EC (A0402331)
NT1R03EF (A0402332)
NT1R03EP (A0402333)
NT1R03EV (A0402334)
60 cm (2 ft.)
1.2 m (4 ft.)
3 m (10 ft.)
8 m (25 ft.)
14 m (45 ft.)
60 cm (2 ft.)
1.2 m (4 ft.)
3 m (10 ft.)
8 m (25 ft.)
14 m (45 ft.)
25-pin extension cable: connects ports of
cables NT1R03AA and NT1R03BA to external
equipment
Note: This cable is also used for MSDL and
AML on Options 21Р81.