Meridian America Link/Customer Controlled Routing User Manual
Page 487
Chapter 14: Software installation, upgrade, and update procedures 469
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 8: Load the application software from tape (continued)
24
You are asked whether you want to reenter the module name or
address (Figure 246).
If you have not made a mistake, type n and press [Return].
If you want to reenter the module name and address, type y and
press [Return]; you will return to step 22.
Figure 247
Reboot prompt
Would you like to reboot the system now (y/n) ?
25
You are prompted to reboot the system (Figure 247). Type y and
press [Return].
Figure 248
Reboot messages 1
INIT: New run level: 6
The system is coming down. Please wait.
System services are now being stopped.
Terminating Applications
/usr/bin/maint: /dev/tty: cannot create
cron aborted: SIGTERM
The system is down.
NOTICE: System Reboot Requested (0)
The system clears and the messages in Figure 249 appear.
Note: The following figure is illustrative only. Your messages may be
different, depending on the application(s) purchased.