Meridian America Link/Customer Controlled Routing - Manual (Page 285)

Chapter 10: Installing peripheral devices 267
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
7 If you need to quit Reflection 4+ (after logging out of the system),
press [Alt]+[Ctrl]+[m] to see the Reflection 4+ menu bar. Press <F8>
twice.
8 To use the configuration file at any time, go to the appropriate
directory, type r4 meridian.cfg, and press [Enter].
Meridian Terminal Emulator (MTE 8)
Meridian Terminal Emulator Release 8 allows you to connect to your CCR
application from your PC using Microsoft Windows NT or Windows 95.
1 Double-click the MTE8 icon.
The MTE8 window appears.
2 On the Settings menu, click Edit Options.
3 Select a connection type (COM1, COM2, or LAN)>
4 If you are connecting to CCR though a serial port (COM1 or COM2),
click either 2400 Baud or 9600 Baud for the connection speed.
5 Click CCR.
6 If you want to use these values for only the current session, click
OK. If you want to save these values and defaults for all future
sessions, click Save Options, then click OK.
7 Wait until you are connected to CCR.
8 If you are prompted for a display type, select VT220.
9 Log in to CCR.
For more information on MTE7, refer to the Meridian Terminal Emulator
User Guide, Product Release 8.